Reflex Cradles are designed for use in areas with floor level deviations. They eliminate the need for exact subfloor tolerances and provide a cost effective alternative to expensive levelling screeds.
Simple to use
Deviations of up to 32mm can be accommodated by using only one size of Reflex Cradle. Floor heights can be easily adjusted using our glue free shape fit packers.
No need to screed
Reflex Cradles can be adjusted quickly and easily on site thus saving valuable time and resources.
Reflex Cradles also save time and money for flooring contractors by making installation, ordering and even site surveys easy. By using the 16mm elevation with a standard 36mm flooring batten and 21mm flooring boards a minimum floor depth of 73mm can be achieved.
Turn the cradle through 90 degrees to the 30mm elevation and use our unique packers with 36mm battens to achieve a maximum floor height of 103mm. This can be increased even further if higher flooring battens are used.
Our cradles are suitable for use with structural floorboards and flooring grade sheet materials (minimum thickness for both of 18mm).
Achieving the Highest Standards
Tested at the Centre for Sports Technology - Greenwich, London. Reflex cradles comply with BS7044 Part 4 and are classified as “impact energy absorbing”. Reflex Cradles also pass the highest A4 category of the EN14904 sports performance standard.
Quality Assured
Reflex Cradles are made from impermeable, high quality and robust ABS Plastic.
The specially formulated closed cell, resilient foam impact pad is attached to the base and offers unrivalled performance.
Reflex Packers are also produced from the same high quality virgin ABS plastic.
Fully tested and certified
Reflex cradles have been tested and certified to British and European Standards for compliance with acoustic standards.
| Shock Absorption | A4 PASS |
| Vertical deflection | A4 PASS |
| Vertical ball rebound | A4 PASS |
| Friction | A4 PASS |
| Resistance to rolling load | A4 PASS |
Beware Imitations
Reflex Cradles look and perform like no other cradle. The Reflex cradle is the subject of UK registered design No. 4009139 and UK patent application No. GB0818603.3
